Regarding the issue of whether laser cutting organza will cause burrs, frayed edges, and snagging

2026-10-28

First, let us understand what organza is. Organza, also called Kegan gauze, is known in English as Organza. Organza is transparent or semi-transparent and belongs to the category of light gauze. The French like to use organza to make wedding dresses. Organza includes ordinary organza and silk organza; the difference is that one is chemical fiber and the other is silk.

Whether the material is silk, gauze, or chemical fiber, it is very suitable for cutting with a laser cutting machine. Since laser cutting is a type of thermal processing, the cut edges of organza automatically fuse, so there will be no frayed edges or burrs. Moreover, laser cutting is non-contact processing, with no "blade" in direct contact with the organza, so there will be no snagging caused by the cutting process.

When using a laser cutting machine to cut organza, Tianyi Laser reminds you to note that the power should not be too high, otherwise excessive edge fusion may occur. Because of the edge fusion effect of thermal cutting, multiple layers cannot be cut together unless the operator is very experienced, is thoroughly familiar with power, processing speed, material density, and chemical fiber content, and has sufficient experience in cutting organza. Even then, paper should be covered during processing to reduce heat radiation. However, without such processing experience, multi-layer processing is not recommended, as it generally causes multiple layers of organza to fuse together and pull threads when separated. If you encounter these problems, you can communicate with the laser tube manufacturer or the machine manufacturer to select suitable equipment for processing.