Can antifreeze be used in laser tubes?

2026-11-01

Laser tubes can use antifreeze for short periods, but it is generally not recommended for long-term use, and you should certainly not casually pour automotive antifreeze into them. Antifreeze can indeed prevent freezing, but if the wrong type is chosen or used incorrectly, it may affect laser power, damage the piping, or even ruin the laser tube.

🧊 When is antifreeze actually needed?

Antifreeze should only be considered when the ambient temperature may drop below 0°C and you cannot ensure continuous circulation of the water chiller or drain the cooling water after each shutdown. If the workshop has heating, the water chiller can be kept running, or the water can be conveniently drained after shutdown, these methods are preferable and more reliable than adding antifreeze.

⚠️ Key point: Do not use ordinary automotive antifreeze.

Ordinary automotive antifreeze contains many additives and may be conductive, interfering with the normal ionization of the laser tube, affecting output stability and power, and in severe cases damaging the laser tube.

Some inferior antifreezes can corrode the internal water pipes of the laser, causing irreversible damage.

If you must use antifreeze, choose genuine laser-specific antifreeze (such as Clariant Antifrogen N from the United States, etc.) and strictly follow the mixing ratio.

Tests by some manufacturers have shown that most antifreezes have a certain impact on laser power and beam profile, and in extreme cases can damage the laser tube.

🛠️Correct steps for adding antifreeze:

First, turn off the water chiller and cut the power, then open the drain valve to empty the old water.

According to the tank capacity and ambient temperature, mix the antifreeze and purified water in the required ratio in a separate container and stir well; do not pour it directly into the water chiller.

After filling, run the circulation for about 30 minutes and confirm there are no alarms and the liquid level is normal before use.

🌡️ Switch back after temperatures rise.

Antifreeze cannot be used year-round and cannot completely replace deionized water or purified water. When the weather warms up, drain the antifreeze, flush the piping multiple times with purified water or deionized water, and then restore the normal cooling water.

💡 A more worry-free alternative:

Short-term emergency: Add medical alcohol (ethanol) to purified water or deionized water, with the added amount not exceeding half of the tank volume. It must be drained and cleaned within one week and cannot be used long-term.

Most recommended: Improve the ambient temperature or keep the water chiller running continuously so the cooling water keeps circulating and does not freeze. This is safer than adding antifreeze.

When the ambient temperature is below 0°C, if you insist on using the laser tube, you must choose high-quality automotive-specific antifreeze (mainly composed of ethylene glycol) and dilute it 1:1 with water; however, once the temperature rises, it should be replaced with regular cooling water immediately.